|
   |
Complete
Engine Repower Kits
|
|
Click for a closer view
7100KT Kit
|
Kit No |
Simplicity
7100 Series Tractor Repower Kits |
Price |
|
90-0100-150 |
Replaces Kohler K and KT engines
in 7100 Simplicity and 900 series Allis with Kohler Command CH 18 engine. |
$2195.00 |
|
90-0100-130 |
Replaces Briggs 326XXX engine in
7116 Simplicity with Kohler Command CH 18 engine. |
$2195.00 |
|
Special Order |
Replaces Lombardini Diesel
engine in 7790 Simplicity with Kohler Command CH 18 engine. |
$2195.00 |
| 90-0100-170 |
Replaces Kohler TH engine in
Simplicity Sovereign with a Kohler CH18 engine. |
$2095.00 |
|
Click for a closer view
 |
The 7100 family of kits provide everything needed to repower one of these
tractors, down to the last bolt or screw. They are basically a bolt-in kit,
complete with
detailed illustrated instructions. The twin cylinders and the Lombardini powered units already have the frame cut down on the sides. Units
that are powered by the single cylinder engines require some frame
modification. Templates will be provided. If the frame needs to be cut, it
can be done with a “recip” saw and a drill. Only the Command kits need a 1-1/4” hole saw to cut 2 holes in the bottom of the frame. Everything else can
be done with basic hand tools.
Installing the kit
requires skills greater than those required for basic maintenance and
service, but are within the realm of homeowners with a good understanding of
mechanical things and a good set of mechanics hand tools. The most important
issue: The need to understand or be trained in the procedures required for
the safe handling of gasoline. If there is ANY portion of the installation
or the safety warnings the installer doesn’t understand or has any doubts
about, they should seek professional assistance.
We have had feedback from consumers that have installed these kits, stating
that the kits and instructions are very complete. One of our consumer
customers in 2000 advised us that he got home from work at 5:00 o'clock,
changed clothes and started on the project. At 8:30 he was driving the
tractor around the yard. He said everything was there down to the last screw
and the instructions addressed everything and needed no improvement. The
tractor was a 917 Allis which required no cutting of the frame. The
engine kit was the 7100KT.
It is our goal to provide the finest solutions to the problems resulting
from the elimination of the old families of engine and to help people move
to more environmentally friendly, quieter, cooler running, longer lived,
more fuel efficient engines. We welcome feedback. This is why we include a
customer feedback sheet in every instruction packet. |
|
Click for a closer view |
Now available, 25 HP replacement kits for Sun Star and Ultima --
Fully temperature tested and temperature certified by Kohler. |
Kit No. |
|
Price |
|
90-0100-120
|
Simplicity
Sun Star and Allis 1900 Ultima Repower Kits
(20 HP Kohler CH) |
$2695.00 |
|
90-0100-125 |
Simplicity
Sun Star and Allis 1900 Ultima Repower Kits
(25 HP Kohler CH) |
$2945.00 |
|
Click for a closer view
SS-1 Kit |
Complete Repower Kit for the
Simplicity Sun Star and the Allis (Allis-Chalmers, Deutz-Allis or Agco-Allis) 1900
series tractors powered with the
Kohler Magnum engines. Kit includes all parts necessary to change the
tractor from the M18 or M20 Kohler to the CH 20 Kohler Command engine.
Detailed step by step instructions and drawings are included. This kit can
be installed with normal hand tools, plus a drill, a 3/4” hole saw, a 2”
hole saw (to cut holes in sheet metal), a 3/4” metal cutting bit, a small
mounted stone to de-burr holes in sheet metal, a pair of metal snips, a
3/16” drill bit (to drill out pop rivets), a pop riveter, a 12-volt test
light and safety glasses.
Installation of this kit requires mechanical skill beyond that required for
normal service and maintenance procedures. It requires knowledge or
training in procedures for the safe handling of gasoline. If the person
installing this kit has any doubt regarding their mechanical ability at any
stage of the installation, professional assistance should be obtained -- at
least for that portion. Normal installation time will be 5 hours or
more depending on the ability of the installer. |
|
Click each picture for a closer view |
Also Coming Soon :
John
Deere 400-series 25 HP kits! They've also recently passed OEM heat and
dyno testing, and will soon be available for ordering.
All prices plus shipping.
Kits will be shipped from Anamosa, Iowa. Engines for kits may be shipped
from Anamosa, Kansas City, St. Louis or Memphis. Repower Engineering
reserves the right to change prices or specifications without notice.
